Materials; Applicable Standards; Us Patents - ABB ACS800 Hardware Manual

126

Materials

Drive enclosure
Package
Disposal

Applicable standards

• EN 61800-5-1 (2003)
• EN 60204-1 (2006)
• EN 60529: 1991 (IEC
529)
• IEC 60664-1 (2007)
• EN 61800-3 (2004)
• UL 508C (2002)
• NEMA 250 (2003)
• CSA C22.2 No. 14-05
(2005)

US patents

Technical data
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
• PC/ABS 2.5 mm, colour NCS 1502-Y (RAL 90021 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100 micrometres,
colour NCS 1502-Y
plywood and wood. Plastic covering of the package: PE-LD, bands PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All metal
parts can be recycled. The plastic parts can either be recycled or burned under controlled
circumstances, according to local regulations. Most recyclable parts are marked with
recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit boards
can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the printed circuit
boards contain lead, both of which are classified as hazardous waste within the EU. They
must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 61800-5-1 and EN 60204-1.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements – electrical,
thermal and energy
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test
methods
UL Standard for Safety, Power Conversion Equipment, second edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
Industrial control equipment
This product is protected by one or more of the following US patents:
4,920,306 5,301,085 5,463,302 5,521,483 5,532,568 5,589,754
5,612,604 5,654,624 5,799,805 5,940,286 5,942,874 5,952,613
6,094,364 6,147,887 6,175,256 6,184,740 6,195,274 6,229,356
6,252,436 6,265,724 6,305,464 6,313,599 6,316,896 6,335,607
6,370,049 6,396,236 6,448,735 6,498,452 6,552,510 6,597,148
6,741,059 6,774,758 6,844,794 6,856,502 6,859,374 6,922,883
6,940,253 6,934,169 6,956,352 6,958,923 6,967,453 6,972,976
6,977,449 6,984,958 6,985,371 6,992,908 6,999,329 7,023,160
7,034,510 7,036,223 7,045,987 7,057,908 7,059,390 7,067,997
7,082,374 7,084,604 7,098,623 7,102,325 D503,931
D510,320 D511,137 D511,150
D510,319
D512,026 D512,696 D521,466.