Setting in the local station
Connect the engineering tool to the CPU module on the local station and set the parameters.
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 76 Setting in the master station)
2.
Set the master/local module as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add the module labels of the master/local module. The addition method of the module label is the same as that of the
master station. ( Page 76 Setting in the master station)
4.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Required settings]
5.
Set the own station setting as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Basic Settings] [Own station Settings]
3.2 Example of Communications Between a Master Station and a Local Station
3 PROGRAMMING
79
3