Mitsubishi Electric MR-D30 Instruction Manual page 133

5. PARAMETERS
No. Symbol
PSD10 **SDO3 Output device selection DO3
Select an input device to assign to DO3A (CN10A-9) and DO3B (CN10B-9). Setting method is the same as [Pr.
PSD08].
Setting
digit
_ _ x x
_ x _ _
x _ _ _
Incorrect setting of this parameter will trigger [AL. 7A.3]. Refer to section 7.2 for details.
PSD11 **SDO4 Output device selection DO4
Select an output device to assign to DO4NA (CN10A-18) and DO4PB (CN10B-16). Setting method is the same
as [Pr. PSD08].
Setting
digit
_ _ x x
_ x _ _
x _ _ _
Incorrect setting of this parameter will trigger [AL. 7A.3]. Refer to section 7.2 for details.
Name and function
Explanation
Output device selection DO3
Refer to table 5.4 for setting.
For manufacturer setting
Explanation
Output device selection DO4
Refer to table 5.4 for setting.
For manufacturer setting
5 - 16
Initial
Setting
value
range
[unit]
Initial Setting
value range
00h 00h
to
0Ah
0h
0h
Initial Setting
value range
00h 00h
to
0Ah
0h
0h