Uploading Software From Wag Using Xfiles Command; Figure 5-2. Send File Pop-Up Window; Figure 5-3. Zmodem File Send Screen - Siemens A53457 Installation & Maintenance

MAINTENANCE
5. Select the file location of the software to be downloaded. Set the file transfer protocol to
Zmodem and then click Send. The Zmodem File Send screen will be displayed.
6. When the download is complete, restart the WAG.
5.3

UPLOADING SOFTWARE FROM WAG USING XFILES COMMAND

The xfiles command is to be used only with the serial interface. If the user
attempts to run this command via Telnet sessions, the file transfer will fail.
Document No.: COM-00-05-16
Version: C.1

Figure 5-2. Send File Pop-up Window

Figure 5-3. Zmodem File Send Screen

5-2
NOTE
June 2006, Revised June 2014