Table of Contents
Advertisement
INSTALLATION AND CONFIGURATION
2. Select a desired serial port change and press ENTER. Repeat for each desired change.
3. To exit without making a change, select "Abandon all changes".
4. To enable the changes, select "Accept current values".
When finished, the user will be returned to the First Configuration Menu. The new serial
interface settings are displayed.
5. Prior to exiting the First Configuration Menu, select "Save changes then restart" to save
changes and restart the WAG.
2.6.4
Serial Format
Changing the serial format can be selected from the following communication protocols:
•
RAW
•
Genisys ATCS Office
Genisys ATCS Field
•
HDLC UI
•
Command mode
•
To Change the Serial Format:
Document No.: COM-00-05-16
Version: C.1
Figure 2-14. Serial Port Interface Screen
2-14
June 2006, Revised June 2014
Advertisement
Table of Contents
Troubleshooting
