[Route:]; Close - HP E1351A User Manual

[ROUTe:]

Subsystem Syntax

CLOSe

Parameters
Comments
Chapter 5
The
[ROUTe:]
multiplexer modules in a switchbox.
[ROUTe:]
CLOSe <
CLOSe? <
OPEN <
OPEN? <
SCAN <
:MODE <
:MODE?
:PORT <
:PORT?
SETTling
[:TIME] <
[:TIME]? [MIN | MAX] <
[ROUTe:]CLOSe <
channel list. The channel_list for
circumstances, (@ccnn,ccnn), where cc = card number (00-99) and nn = channel
number (00-15). Before using the
SCAN:MODE
will be closed for a given channel. You can only have one closed channel on a
card at a time. If you want to close a channel on two different cards in the same
VXIbus instrument (for example, 102,208) you can use (@ccnn,ccnn).
Parameter Name
channel_list
•
Specify
command, specify the
•
Closing Channels: To close:
use
–
use
–
different cards;
use
–
use
–
use
–
sequential channels;
or any combination.
–
Closure order for multiple channels with a single command is
not guaranteed.
•
Related Commands:
[ROUTe:]SCAN:MODE
•
*RST Condition: All multiplexer channels are open.
HP E1351A/53A 16-Channel FET Multiplexer Command Reference
subsystem controls switching and scanning operations for the
channel_list >
channel_list >
channel_list >
channel list
>
channel_list
>
mode
>
port >
time channel_list
>, <
channel_list
channel_list > closes multiplexer channels specified in the
CLOSe
CLOSe
and SCAN:PORT , as these commands determine what switches
Parameter Type
Numeric
and
SCAN:MODE SCAN:PORT
SCAN:MODE
[ROUTe:]CLOSe (@ccnn)
[ROUTe:]CLOSe (@ccnn,ccnn)
[ROUTe:]CLOSe (@ccnn,ccnn)
[ROUTe:]CLOSe (@ccnn:ccnn)
[ROUTe:]CLOSe (@ccnn:ccnn,ccnn:ccnn)
[ROUTe:]OPEN
, [ROUTe:]SCAN:PORT
>
>
is in the form (@ccnn), or in special
command, you must specify the
Range of Values
cc00 - cc15
: Before using the
and .
SCAN:PORT
for a single channel;
for single channels on
for multiple channels;
for sequential channels;
for a group of
,
[ROUTe:]CLOSe?
CLOSe
,
63