ABB AC31 Assembly And Operation Manual page 136

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07AC91-AD2
Connection to the CS31 bus
Data
Connections
CS31 bus type
Termination resistor
Mechanical data
Data
Width x height x depth
Weight
Dimensions for mounting
Mounting information
To assemble or disassemble the replacement device, grab the device at the housing and not
directly at the S500 module.
Ordering data
Order No.
1SAP 800 100 R0010
136
For further information, please refer to the existing documentation
System description Advant Controller 31.
The dimensions for the assembly holes are the same for the replacement
device and the existing device.
3ADR010122, 8, en_US
Value
X1/B2, X1/B1
05 (analog input/output)
Not available (must be provided externally if
needed)
Value
Replacement device: 120 x 140 x approx. 80
mm
Existing device: 120 x 140 x 85 mm
Replacement device: 362 g
Existing device: 450 g
See assembly instructions 07AC91-AD2
(3ADR020085M0401)
Scope of delivery
Analog input/output module 07AC91-AD2
1x 2-pole terminal block (3.81 mm grid space)
1x 3-pole terminal block (5.08 mm grid space)
1x 5-pole terminal block (5.08 mm grid space)
4x 8-pole terminal blocks (3.81 mm grid
space)
2018/09/24