ABB AC31 Assembly And Operation Manual page 70

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07DC91-AD
Data
Input voltage +30 V
Maximum cable length:
-> Shielded
-> Unshielded
Protection against reversed voltage
Overvoltage protection
*) Input delay of the S500 module DC532. The transmission rate via serial buses has not been
taken into account.
1.5.1.8.3 Technical Data of the Digital Outputs
Data
Connections
Type of digital outputs
Demagnetization with inductive load
Switching frequency with ohmic load
Output voltage at signal 1
Output delay: 0 -> 1 or 1 -> 0
Maximum cable length:
-> Shielded
-> Unshielded
1.5.1.8.4 Technical data of the configurable inputs/outputs
Data
Connections
Use as digital input
Use as digital output
70
For further information, please refer to the existing documentation
System description Advant Controller 31.
For further information, please refer to the existing documentation
System description Advant Controller 31.
3ADR010122, 8, en_US
Value
Replacement device: < 8 mA
Existing device: £ 9 mA
1000 m
600 m
Yes
Up to 30 V DC
Value
X5/3.0, X5/3.1, X5/3.2, X5/3.3, X5/3.4, X5/3.5,
X5/3.6, X5/3.7
High-side switch
With a varistor inside the device (with other
circuitry)
On request
X4 / L+ (typ. 24 V) -0.8 V
On request
1000 m
600 m
Value
X6/4.0, X6/4.1, X6/4.2, X6/4.3, X6/4.4, X6/4.5,
X6/4.6, X6/4.7
Ä Chapter 1.5.1.8.2 "Technical Data of
See
the Digital Inputs" on page 69
Ä Chapter 1.5.1.8.3 "Technical Data of
See
the Digital Outputs" on page 70
2018/09/24