ABB AC31 Assembly And Operation Manual page 68

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07DC91-AD
Fig. 43: Front view: DC532
1.5.1.8 Technical data
This section provides additional information on section
bus system data" on page 4. In case of doubt, the following information applies.
1.5.1.8.1 Technical Data of the complete device
Data
Process voltage:
-> Connections
-> Fuse for L+
- Electrical isolation
Current consumption:
-> via L+
- Inrush current via L+ (when voltage is
switched on)
Power consumption
Max. power dissipation within the module (out-
puts unloaded)
Address setting and configuration
Operating and error indications
68
Value
X4/L+ (pin 22), X4/L+ (pin 23), X4/M (pin 24),
X4/M (pin 25)
10 A, fast acting
No
0.19 A and max. 0.5 A per output
0.17 A²s
Replacement device: 200 W
Existing device: 202 W
Replacement device: 6 W
Existing device: 5 W
DIP switch on right side of the housing
Replacement device: 41 LEDs
Existing device: 33 LEDs
3ADR010122, 8, en_US
Ä Chapter 1.3 "System data and CS31
2018/09/24