Table of Contents
Advertisement
Description
Use the display radius scheme command to display the configuration information of RADIUS schemes.
If you do not specify any RADIUS scheme, the command displays the configuration information of all
RADIUS schemes.
Related commands: radius scheme.
Examples
# Display the configuration information of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName
Index : 0
Primary Auth Server:
IP: 1.1.1.1
Encryption Key : 345
Primary Acct Server:
IP: 1.1.1.1
Encryption Key : 345
Second Auth Server:
IP: 1.1.2.1
Encryption Key : N/A
IP: 1.1.3.1
Encryption Key : N/A
Second Acct Server:
IP: 1.1.2.1
Encryption Key : N/A
Auth Server Encryption Key : 123
Acct Server Encryption Key : N/A
Accounting-On packet disable, send times : 50 , interval : 3s
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
NAS-IP address
Attribute 25
------------------------------------------------------------------
Total 1 RADIUS scheme(s).
Table 22 Output description
Field
SchemeName
Index
: radius1
Description
Name of the RADIUS scheme.
Index number of the RADIUS scheme.
Type : extended
Port: 1812
Port: 1813
Port: 1812
Port: 1812
Port: 1813
94
State: active
State: active
State: active
State: active
State: block
: 3
: 3
: 12
: 5
: 500
: 5
: without-domain
: Byte
: one
: 1.1.1.1
: car
Advertisement
Table of Contents
