HP A-U200 Command Reference Manual page 27

verbose: Displays detailed information about sessions. Without this keyword, the command displays
brief information about the specified sessions.
Description
Use the display session table command to display information about sessions.
If no argument is specified, the command displays all sessions.
•
If no virtual device is specified, the command displays the sessions on all virtual devices.
•
• If both the source-ip and destination-ip keywords are specified, the command displays only the
sessions with the specified source and destination IP addresses.
Examples
# Display brief information about all sessions.
<Sysname> display session table
Initiator:
Source IP/Port : 192.168.1.18/2048
Dest IP/Port
Pro
VPN-Instance/VLAN ID/VLL ID:
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port
Pro
VPN-Instance/VLAN ID/VLL ID:
Total find: 2
# Display detailed information about all sessions.
<Sysname> display session table verbose
Initiator:
Source IP/Port : 192.168.1.19/137
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.255/137
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Pro: UDP(17)
Start time: 2009-03-17 10:39:43
Root
Received packet(s)(Init): 6 packet(s) 468 byte(s)
Received packet(s)(Reply): 0 packet(s) 0 byte(s)
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.55/23
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
: 192.168.1.55/768
: ICMP(ICMP(1))
: 192.168.1.55/23
: TCP(TCP(6))
: 192.168.1.255/137
: 192.168.1.19/137
App: NBT-name
TTL: 2s
Zone(in): Management
Zone(out): Local
: 192.168.1.55/23
: 192.168.1.18/1212
State: UDP-OPEN
21