Timer Quiet (Hwtacacs Scheme View); Timer Realtime-Accounting (Hwtacacs Scheme View) - HP A-U200 Command Reference Manual

timer quiet (HWTACACS scheme view)

Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Primary server quiet period, in minutes. It ranges from 1 to 255.
Description
Use the timer quiet command to set the quiet timer for the primary server. When the primary server is
found unreachable, the device changes the status of the server from active to blocked and keeps the
server in blocked state until this timer expires.
Use the undo timer quiet command to restore the default.
By default, the primary server quiet period is 5 minutes.
Related commands: display hwtacacs.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10

timer realtime-accounting (HWTACACS scheme view)

Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Real-time accounting interval in minutes, zero or a multiple of 3 in the range 3 to 60. A value
of zero means "Do not send online user accounting information to the HWTACACS server."
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default.
134