Table of Contents
Advertisement
By default, the real-time accounting interval is 12 minutes.
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
Consider the performance of the NAS and the HWTACACS server when you set the real-time accounting
interval. A shorter interval requires higher performance. Use a longer interval when there are a large
number of users (more than 1000, inclusive).
Table 26 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
timer response-timeout (HWTACACS scheme view)
Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Default level
2: System level
Parameters
seconds: HWTACACS server response timeout period in seconds, in the range 1 to 300.
Description
Use the timer response-timeout command to set the HWTACACS server response timeout timer.
Use the undo timer command to restore the default.
By default, the HWTACACS server response timeout time is 5 seconds.
HWTACACS is based on TCP. When the server response timeout timer or the TCP timeout timer times out,
the device is disconnected from the HWTACACS server.
Related commands: display hwtacacs.
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1.
<Sysname> system-view
Real-time accounting interval (minute)
3
6
12
15 or more
135
Advertisement
Table of Contents
