Rule Comment; Step - HP A-U200 Command Reference Manual

Unified threat management products

Table of Contents

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule permit source 10.0.0.0 0.255.255.255

[Sysname-acl-basic-2000] rule permit source 172.17.0.0 0.0.255.255

[Sysname-acl-basic-2000] rule permit source 192.168.1.0 0.0.0.255

[Sysname-acl-basic-2000] rule deny source any

rule comment

Syntax

rule rule-id comment text

undo rule rule-id comment

View

IPv4 basic/advanced ACL view, Ethernet frame header ACL view

Default level

2: System level

Parameters

rule-id: Specifies an ACL rule ID, in the range of 0 to 65534. The ACL rule must already exist.

text: Specifies a comment about the ACL rule, a case-sensitive string of 1 to 127 characters.

Description

Use the rule comment command to add a comment about an existing ACL rule or edit its comment to

make the rule easy to understand.

Use the undo rule comment command to delete the ACL rule comment.

By default, an IPv4 ACL rule has no rule comment.

Related commands: display acl.

Examples

# Create a rule in IPv4 basic ACL 2000 and add a comment about the rule.

<Sysname> system-view

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule 0 deny source 1.1.1.1 0

[Sysname-acl-basic-2000] rule 0 comment This rule is used on GigabitEthernet 0/1.