Retry Stop-Accounting (Hwtacacs Scheme View); Secondary Accounting (Hwtacacs Scheme View) - HP A-U200 Command Reference Manual

Description
Use the reset stop-accounting-buffer command to clear buffered stop-accounting requests that get no
responses.
Related commands: stop-accounting-buffer enable and display stop-accounting-buffer.
Examples
# Clear the stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1

retry stop-accounting (HWTACACS scheme view)

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts, in the range 1 to 300.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting request
transmission attempts.
Use the undo retry stop-accounting command to restore the default.
By default, the maximum number of stop-accounting request transmission attempts is 100.
Related commands: reset stop-accounting-buffer and display stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 50 for HWTACACS
scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50

secondary accounting (HWTACACS scheme view)

Syntax
secondary accounting ip-address [ port-number ]
undo secondary accounting
View
HWTACACS scheme view
130