HP A-U200 Command Reference Manual page 25

View
Any view
Default level
2: System level
Parameters
vd-name vd-name: Displays the session statistics of the specified virtual device. The vd-name argument
specifies the name of a virtual device. It is a case-insensitive string of 1 to 20 characters, which can be
numerals, letters and underlines.
Description
Use the display session statistics command to display statistics about sessions.
With no virtual device specified, the command displays the session statistics of all virtual devices. With
no keyword specified, the command displays all session statistics information. If you specify to display
session statistics on a specified virtual device, the output information does not contain the number of
dropped packets.
Examples
# Display statistics about all sessions.
<Sysname> display session statistics
Current session(s):593951
Current
Current
Current
Current
Current relation table(s): 50000
Session establishment rate:
TCP
UDP
ICMP
RAWIP
Received
Received
Received
Received
Dropped
Dropped
Dropped
Dropped
Table 8 Output description
Field
Current session(s)
TCP session(s): 0
Half-Open: 0
UDP session(s): 593951
ICMP session(s): 0
RAWIP session(s): 0
Session establishment rate:
Session establishment rate: 184503/s
Session establishment rate:
Session establishment rate:
TCP:
UDP: 86810494849 packet(s)
ICMP:
RAWIP:
TCP:
UDP:
ICMP:
RAWIP:
Half-Close: 0
184503/s
1538 packet(s)
307232 packet(s)
0 packet(s)
0 packet(s)
0 packet(s)
0 packet(s)
0 packet(s)
Description
Total number of sessions
19
0/s
0/s
0/s
4340524910260 byte(s)
17206268 byte(s)
337567 byte(s)
0 byte(s)
0 byte(s)
0 byte(s)
0 byte(s)
0 byte(s)