Table of Contents
Advertisement
HWTACACS account client request EXEC number: 0
HWTACACS account client request network number: 0
HWTACACS account client request system event number: 0
HWTACACS account client request update number: 0
HWTACACS account client response error number: 0
HWTACACS account client round trip time(s): 0
display stop-accounting-buffer (for HWTACACS)
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
Any view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are destined
for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme name is a
case-insensitive string of 1 to 32 characters.
Description
Use the display stop-accounting-buffer command to display information about buffered stop-accounting
requests.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable, and retry
stop-accounting.
Examples
# Display information about stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
hwtacacs nas-ip
Syntax
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip ip-address
View
System view
Default level
2: System level
Parameters
ip-address: IP address in dotted decimal notation. It must be an address of the device and cannot be
0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback address.
123
Advertisement
Table of Contents
