Table of Contents
Advertisement
Parameters
ip-address: IP address of the primary HWTACACS accounting server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the primary HWTACACS accounting server. It ranges from 1 to
65535 and defaults to 49.
Description
Use the primary accounting command to specify the primary HWTACACS accounting server.
Use the undo primary accounting command to remove the configuration.
By default, no primary HWTACACS accounting server is specified.
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server affects only accounting processes that occur after
the remove operation.
Related commands: display hwtacacs.
Examples
# Specify the IP address and port number of the primary accounting server for HWTACACS scheme
test1 as 10.163.155.12 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49
primary authentication (HWTACACS scheme view)
Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the primary HWTACACS authentication server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the primary HWTACACS authentication server. It ranges from 1 to
65535 and defaults to 49.
Description
Use the primary authentication command to specify the primary HWTACACS authentication server.
Use the undo primary authentication command to remove the configuration.
127
Advertisement
Table of Contents
