Table of Contents
Advertisement
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 as 10.163.155.13 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
reset hwtacacs statistics
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
View
User view
Default level
1: Monitor level
Parameters
accounting: Specifies the HWTACACS accounting statistics.
all: Specifies all HWTACACS statistics.
authentication: Specifies the HWTACACS authentication statistics.
authorization: Specifies the HWTACACS authorization statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
reset stop-accounting-buffer (for HWTACACS)
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
User view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are destined
for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme name is a
case-insensitive string of 1 to 32 characters.
129
Advertisement
Table of Contents
