Table of Contents
Advertisement
Rear Panel
8 Audio signal I/O section
1 PLAYER 1 INPUT connectors
2 PLAYER 2 INPUT connectors
3 AUX INPUT connectors
AUDIO
LINE OUTPUT
3
1
4
2
1 PLAYER 1 INPUT 1 to 4 connectors (XLR 3-
pin)
Input analog audio signals from external equipment.
Connect to the audio channel 1 to 4 output connectors
of the player 1 VCR.
2 PLAYER 2 INPUT 1 to 4 connectors (XLR 3-
pin)
Input analog audio signals from external equipment.
Connect to the audio channel 1 to 4 output connectors
of the player 2 VCR.
3 AUX INPUT (auxiliary input) 1 to 2 connectors
(XLR 3-pin)
Input analog audio signals from external equipment.
Connect to the audio channel 1 to 2 output connectors
of auxiliary audio equipment.
106
Chapter 4 Location and Function of Parts
RECORDER
AUX
INPUT
INPUT
3
1
2
MONITOR
OUTPUT
2/4
4
2
4 MONITOR OUTPUT connectors (phono jack)
Output the analog audio signals of the equipment
currently selected as the source by this unit. Connect to
the audio input connectors of the audio amplifier used
as a monitor. Specify output of channels 1/2 or
channels 3/4 by an EditStation software setting.
Refer to the online manual for details about the software
setting.
5 RECORDER INPUT 1 to 4 connectors (XLR 3-
pin)
Input analog audio signals from external equipment.
Connect to the audio channel 1 to 4 output connectors
of the recorder VCR.
6 LINE OUTPUT connectors (XLR 3-pin)
Output the analog audio signals recorded by the
recorder. Connect to the audio channel 1 to 4 input
connectors of the recorder VCR.
PLAYER 2
INPUT
1
3
1/3
4
4 MONITOR OUTPUT connectors
5 RECORDER INPUT connectors
6 LINE OUTPUT connectors
White connector: channel 1 or channel 3
Red connector: channel 2 or channel 4
PLAYER 1
INPUT
1
3
1
2
4
2
Advertisement
Table of Contents
