Sony EditStation ES-7 Operating Instructions Manual page 35

3
Play back the tape in player 1 to find the desired scene.
Use the following buttons.
You can also perform the same operations with the control panel.
Operation Video Clip Editor operation
Normal Click ".
playback
Reverse Click ".
playback
High-speed Click 0 or ).
search
Low-speed Click 1" or "1 for frame-by-
search frame playback.
Still Click the STILL button.
playback
4
Specify the start (IN point) of the video clip.
MARK IN button
Video Clip Editor: Click the MARK IN button at the desired scene.
Control panel: Press the MARK IN button at the desired scene.
PLAY button
[ES] button
MARK OUT button
MARK IN button
Search dial
Press the search dial to toggle it
between shuttle and jog mode.
ø
(Raised position): Shuttle mode
Ø
(Depressed position): Jog mode
Control panel operation
Press the PLAY button.
In shuttle mode, rotate the search
dial slightly in the counterclockwise
direction.
In shuttle mode, rotate the search
dial all the way in the clockwise or
counterclockwise direction.
In jog mode, rotate the search dial
slowly.
Move the search dial to the center
position. If the STILL function has
been assigned to the [ES] button,
press the [ES] button.
MARK OUT button
Chapter 2 Introduction to Editing Operations
(Continued)
35