Table of Contents
Advertisement
Installing Optional Boards
For the positions of the motherboard slots for the following
boards, see page 76.
ESBK-7021 Basic DME Switcher Board or
ESBK-7023 Advanced DME Switcher
Board
Install the two boards of the ESBK-7021/7023 in the
motherboard slots shown below.
Board name
Position
FM board
Motherboard slot 7
MY board
Motherboard slot 8
Installation Notes
• When installing the ESBK-7022/7024 3D Effect
Board together with the DME switcher board, mount
the 3D Effect Board on the MY board of the DME
switcher board before installing the DME switcher
board in the motherboard slot.
For installation of the 3D effect boards, see "Installing the
ESBK-7022 3D Effect Board for Basic DME Switcher"
(page 81), or "Installing the ESBK-7024 3D Effect Board
for Advanced DME Switcher" (page 82).
• The motherboard slot for the MY board is located
behind the audio connector panel. The audio
connector panel must be removed before installing
the board.
For installation of the MY board, see "Installing the ESBK-
7021/7023 MY board" (page 79).
• The EditStation is shipped from the factory with the
software version installed in it to use the Advanced
DME Switcher. To use the Basic DME Switcher, it
is necessary to carry out software reinstallation.
80
Chapter 3 Connections and Settings
ESBK-7025 External Switcher Interface
Board
Install the two boards of the ESBK-7025 in the
positions shown below.
Board name
Position
DAC board
On the video output (DA) board
IF board
Motherboard slot 7
For more information about installing the DAC board, see
"Installing the adapter board (DAC) supplied with ESBK-
7071 ESDraw" (page 84).
Note
If ESDraw and the ESBK-7071 DAC board are
already installed, you do not need to install the DAC
board on the external switcher video output (DA)
board.
ESBK-7041 Disk Recorder Board
Install the two boards of the ESBK-7041 in the
motherboard slots shown below.
Board name
Position
MPU board
Motherboard slot 2
RP board
Motherboard slot 3
ESBK-7031 QSDI Interface Board
Install the ESBK-7031 QSDI Interface Board in
motherboard slot 4.
Note
When installing both the ESBK-7031 and the ESBK-
7032 SDI Interface Board, mount the SDI Interface
Board on the IO board before installing the ESBK-
7031 in the motherboard slot.
For more information about installing the ESBK-7032, see
"Installing the ESBK-7032 SDI Interface Board" (page 83).
Advertisement
Table of Contents
