Setting The Video Signal Format - Sony EditStation ES-7 Operating Instructions Manual

Setting the Video Signal Format

After connecting the VCRs and other peripheral
equipment in your system, use the EditStation Settings
menu to set their video signal formats.
Note
The software must be set up when you use the unit for
the first time.
For more information about setting up the software, see
"Setting Up Windows NT (Using the Unit for the First
Time)" (page 88).
1
Log on and start EditStation using the procedures
explained in "Starting the System" (page 17) and
"Starting EditStation" (page 30).
The EditStation initial screen appears.
2
Make the Clip Bin window the active window and
select Device from the Setting menu.
The Device dialog box appears.
3
Click the tab for the VCR whose signal format you
want to set.
4
Click the button for Video Format.
A list of video formats appears. Click the . or >
scroll button to scroll the list and display other
formats.
5
Select the desired video signal format from the list
and click it.
The selected format is highlighted in the list box.
6
Click the OK button.
This completes the selection of the video signal
format. You can begin editing with the selected
format.
For more information about the other items in the
Settings menu, see the online manual.
Chapter 3 Connections and Settings
Tabs
87