HP 10500 Series Configuration Manual page 151

Image by image—Activate one image on all slots before activating another image.
•
In standalone mode:
When you install an image, you must begin with the active MPU.
•
When you upgrade an image, you must begin with the standby MPU.
•
In IRF mode:
When you install an image, you must begin with the master. On each member device, begin with
•
the active MPU.
When you upgrade an image, you must begin with a subordinate device. On each member device,
•
begin with the standby MPU.
When you install or upgrade images on an active MPU, the system automatically upgrades its LPUs and
switching fabric modules. You do not need to upgrade their software separately.
Installing or upgrading images for PEXs
Perform this task in an eIRF system when only PEXs need to be upgraded.
Perform this task in user view.
Step
1. (Optional.) Identify
the ISSU method and
possible impact of the
upgrade.
2. Activate images.
Installing or upgrading feature images
You can perform this task on a standalone device, an IRF fabric, or an eIRF system.
Perform this task in user view.
Step
1. (Optional.) Identify
the ISSU method and
possible impact of the
upgrade.
Command
install activate { boot filename | system
filename | feature filename&<1-30> } *
chassis chassis-number slot slot-number test
install activate { boot filename | system
filename | feature filename&<1-30> } *
chassis chassis-number slot slot-number
Command
•
In standalone mode:
install activate { boot filename |
system filename | feature
filename&<1-30>} * slot slot-number
test
•
In IRF mode:
install activate { boot filename |
system filename | feature
filename&<1-30> } * chassis
chassis-number slot slot-number test
141
Remarks
Specify the virtual chassis number
of a PEX for the chassis-number
argument. The slot-number
argument is fixed at 0.
Specify the virtual chassis number
of a PEX for the chassis-number
argument. The slot-number
argument is fixed at 0.
Remarks
The device does not support the
boot filename or system filename
option.
To upgrade a PEX, specify its
virtual chassis number for the
chassis-number argument. The
slot-number argument is fixed at 0.