Managing Directories On The Ftp Server - HP 10500 Series Configuration Manual

Step
4. Log in to the FTP server.
To establish an IPv6 FTP connection:
Step
1. Enter system view.
2. (Optional.) Specify the
source IPv6 address for
FTP packets sent by the
FTP client.
3. Return to user view.
4. Log in to the FTP server.

Managing directories on the FTP server

Perform the following tasks in FTP client view:
Command
•
(Method 1.) Log in to the FTP server from
user view:
ftp ftp-server [ service-port ]
[ vpn-instance vpn-instance-name ]
[ dscp dscp-value | source { interface
{ interface-name | interface-type
interface-number } | ip
source-ip-address } ] *
•
(Method 2.) Log in to the FTP server from
FTP client view:
a. Enter FTP client view:
ftp
b. Log in to the FTP server:
open server-address [ service-port ]
Command
system-view
ftp client ipv6 source { interface
interface-type interface-number | ipv6
source-ipv6-address }
quit
•
(Method 1.) Log in to the FTP server
from user view:
ftp ipv6 ftp-server [ service-port ]
[ vpn-instance vpn-instance-name ]
[ dscp dscp-value | source
{ interface interface-type
interface-number | ipv6
source-ipv6-address } ] * [ -i
interface-type interface-number ]
•
(Method 2.) Log in to the FTP server
from FTP client view:
a. Enter FTP client view:
ftp ipv6
b. Log in to the FTP server:
open server-address
[ service-port ]
81
Remarks
The source IP address
specified in the ftp command
takes precedence over the
one set by the ftp client source
command.
Remarks
N/A
By default, no source IPv6 address
is specified. The source address is
automatically selected as defined
in RFC 3484.
N/A
The source IP address specified in
the ftp ipv6 command takes
precedence over the one set by the
ftp client ipv6 source command.