Modifying Serial Port Parameters; Updating The Extended Bootware Segment - HP 10500 Series Configuration Manual

Option
<0> Reboot

Modifying serial port parameters

When using the console port to access the system, make sure the port parameters are consistent with the
serial port settings on the configuration terminal. Port parameters include the baud rate, data bits, parity
check, stop bits, flow control, and emulation. If the settings are inconsistent, communication will fail. For
more information, see login management configuration in Fundamentals Configuration Guide.
For faster file transfer, change the default baud rate to a higher value before downloading a software
image file with XMODEM through the console port.
To change the baud rate of the console port:
1. Enter 1 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 1
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate
|
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)*
|<2> 19200
|<3> 38400
|<4> 57600
|<5> 115200
|<0> Exit
============================================================================
Enter your choice(0-5):
2. Enter the number that represents the baud rate you want to choose. For example, enter 5 to set the
baud rate to 115200 bps.
NOTE:
The baud rate change is a one-time operation. The baud rate will restore to the default (9600 bps) at
reboot. To establish a console session with the device after a reboot, you must change the baud rate setting
on the configuration terminal to 9600 bps.

Updating the extended BootWare segment

If the extended BootWare segment is corrupt, enter 2 in the BASIC-BOOTWARE menu to update it.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Download successfully!
329344 bytes downloaded!
Updating Extended BootWare? [Y/N]Y
Updating Extended BootWare...............Done.
Change The HyperTerminal's Baudrate Accordingly
Task
Reboot the device.
245
|
|
|
|
|
|
|
|