Skipping The Configuration File At The Next Startup; Managing The Bootware Image - HP 10500 Series Configuration Manual

If password recovery capability is disabled, enter Y at the prompt to complete the task.
Because the password recovery capability is disabled, this operation can
cause the configuration files to be deleted, and the system will start up
with factory defaults. Are you sure to continue?[Y/N]Y
Setting...Done.

Skipping the configuration file at the next startup

To skip the configuration file at the next startup, enter 6 in the EXTENDED-BOOTWARE menu.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):6
Flag Set Success.
This setting takes effect only at the next startup. It does not take effect for subsequent reboots.

Managing the BootWare image

You can use the BootWare Operation menu to back up, recover, and upgrade the BootWare image.
To access the BootWare Operation menu, enter 7 in the EXTENDED-BOOTWARE menu.
Enter your choice(0-9): 7
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash
|<1> Backup Full BootWare
|<2> Restore Full BootWare
|<3> Update BootWare By Serial
|<4> Update BootWare By Ethernet
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
Table 34 BootWare Operation menu options
Option
<1> Backup Full BootWare
Task
Back up the BootWare image.
279
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|