Restrictions And Guidelines; Using The Basic-Bootware Menu (For Lsu1Supb0(Jg496A) Mpus) - HP 10500 Series Configuration Manual

Restrictions and guidelines

Use BootWare menus for software upgrade only when you cannot access the CLI. From BootWare menus,
you can upgrade MPUs only one by one. If the device has two MPUs, HP recommends that you remove
one MPU before upgrading software.
To upgrade software on an MPU from its BootWare menus, make sure you have one connection to its
console port and one connection to its management port. You can only access the BootWare menus
through the console port. The management port can be used for file transfer.
Availability of some menu options depends on the password recovery capability setting.
Using the BASIC-BOOTWARE menu (for
LSU1SUPB0(JG496A) MPUs)
To access the BASIC-BOOTWARE menu:
1. Connect a configuration terminal to the console port of the device.
2. Power on the device.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start memory test
3. Press Ctrl+D within three seconds after the "Press Ctrl+D to access BASIC-BOOTWARE MENU..."
prompt message appears. If you fail to do this within the time limit, the system starts to run the
extended BootWare segment.
=====================<BASIC-BOOTWARE MENU (Ver 1.33) >======================
|<1> Modify Serial Interface Parameter
|<2> Update Extended BootWare
|<3> Update Full BootWare
|<4> Boot Extended BootWare
|<5> Boot Backup Extended BootWare
|<0> Reboot
============================================================================
Ctrl+U: Access BASIC ASSISTANT MENU
Enter your choice(0-5):
Table 19 BASIC-BOOTWARE menu options
Option
<1> Modify Serial Interface Parameter
<2> Update Extended BootWare
<3> Update Full BootWare
<4> Boot Extended BootWare
<5> Boot Backup Extend BootWare
Task
Change the baud rate of the console port.
Update the extended BootWare segment.
If the extended segment is corrupt, choose this option to
repair it.
Update the entire BootWare, including the basic segment
and the extended segment.
Run the primary extended BootWare segment.
Run the backup extended BootWare segment.
244
|
|
|
|
|
|