HP 10500 Series Configuration Manual page 47

Figure 7 Configuring custom attributes for the Telnet user
Verifying the configuration
1. Telnet to the switch, and enter the username test@bbb and password aabbcc to access the switch.
Verify that you have access to diagnostic commands.
<Switch> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.59 ...
******************************************************************************
* Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
login: test@bbb
Password:
<Switch>?
User view commands:
ping
quit
ssh2
super
system-view
telnet
tracert
Ping function
Exit from current command view
Establish a secure shell client connection
Switch to a user role
Enter the System View
Establish a telnet connection
Tracert function
37
*
*
*