HP 10500 Series Configuration Manual page 268

Enter your choice(0-9):4
The following File Control submenu appears:
===============================<File CONTROL>===============================
|Note:the operating device is flash
|<1> Display All File(s)
|<2> Set Image File type
|<3> Set Bin File type
|<4> Delete File
|<5> Copy File
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-5):
Displaying all files
To display all files on the current storage medium, enter 1 in the FILE CONTROL submenu:
Enter your choice(0-5): 1
Display all file(s) in flash:
'M' = MAIN
============================================================================
|NO. Size(B)
|1 2714337
|2 40095744
|01.bin
|3 1948
|4 929964
|5 16
|t
|6 1056
|7 86
|8 294388736 Aug/08/2014 11:27:50 M
|9P01.bin
============================================================================
NOTE:
A maximum of 998 files can be displayed.
Changing the file attribute of a Comware software image
Comware software image file attributes include main (M) and backup (B). A Comware software image
can have any combination of the M and B attributes. An image with neither the M attribute nor the B
attribute is marked as N/A.
On an MPU, you can specify only one main image and one backup image for each type of Comware
image. If you assign the same attribute to two images that are the same type, the most recent assignment
causes the previously assigned attribute to be removed.
'B' = BACKUP
Time
Mar/19/2013 02:03:23 N/A
Aug/08/2014 11:16:57 M
Mar/18/2013 09:59:14 N/A
Mar/18/2013 09:59:15 N/A
Mar/10/2013 19:18:43 N/A
Mar/10/2013 19:18:43 N/A
Mar/18/2013 09:59:13 N/A
'N/A' = NOT ASSIGNED
Type Name
flash:/logfile/logfile.log
flash:/10500-cmw710-boot-R7169P|
flash:/zss.cfg
flash:/zss.mdb
flash:/versionInfo/versionCtl.da|
flash:/versionInfo/version0.dat |
flash:/ifindex.dat
flash:/10500-cmw710-system-R716|
258
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|