Figure 4-19 Select The "Immediately Reset; Figure 4-20 Confirmation Message - NEC SL2100 Hardware Manual

SL2100
6. Select the "Immediately Reset".
There are Immediately Reset or Schedule Reset can be selected when the firmware update will occur.
The changes of the Firmware Update will only occur after the chassis is reset.
The Firmware Update should be executed at a suitable time when the
chassis is not actively in use.
If you choose the schedule reset, check "Schedule Reset" and set the Month, Day, Hour and
Minute. WebPro uploads the firmware package file, and updates the system at the time you specified.
The time you specify should be relative to the time on the chassis, not the
local time of the PC.
Then, Click the Start button.
7. Following Message is displayed and click OK to start uploading to the system.
The time to upload the firmware package file is directly related to the file size. At present, the
Firmware package file is about 60MB, so over LAN it may take several minutes.
4-12

Figure 4-19 Select the "Immediately Reset"

Figure 4-20 Confirmation Message

ISSUE 1.0
Maintenance