ISSUE 1.0
1.5.1 Wall Installation of Chassis
The Main Chassis and Expansion Chassis can be mounted on the wall. Before installing, ensure the
appropriate spacing exists as shown below.
Due to the limit of extension cable length to connect Main Chassis and Expansion Chassis, the install
location of Main Chassis and each Expansion Chassis must be considered as above or as
Figure 2-8 Horizontal Arrangement of Chassis on page
Minimum 200 mm (7.874")
Minimum 200 mm (7.874")
for ventilation and wiring
Minimum 300 mm (11.811")
Minimum 200 mm (7.874")
for ventilation and wiring
Minimum 200 mm (7.874")
Hardware Manual
Ceiling
for ventilation
for ventilation
Floor
Figure 2-7 Vertical Arrangement of Chassis
2-8.
Expansion Chassis
Main Chassis
Minimum 300 mm (11.811")
Expansion Chassis
SL2100
Wall
2-7