Siemens SIPROTEC 5 Operation Manual page 122

Operation in the Operating State
8.4 Indications
Reading from the PC with DIGSI 5
•
To reach the fault log of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Process Data → Log → Fault logs
The status of the fault log last loaded from the device is shown to you.
•
To update (synchronization with the device) click the button Read log entries in the headline of the indi-
cation list.
[scstflmd-030211-01, 1, en_US]
Figure 8-11
Deletability
The fault log of your SIPROTEC 5 device can be deleted. Read about it in chapter
Logs.
Reading on the Device through the On-Site Operation Panel
•
To reach the fault log from the main menu, use the navigation keys of the on-site operation panel.
Main Menu → Indications → Fault logs
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
122
Reading the Fault Log with DIGSI 5
8.4.6 Saving and Deleting the
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016