Changing The Confirmation Id - Siemens SIPROTEC 5 Operation Manual

Operation in the Operating State
8.7 Change Device Settings
[scsprums-040613-01.tif, 1, en_US]
Figure 8-52
•
The setting is accepted in the device through Load configuration in devices.
•
When prompted, enter the confirmation ID and finally click Ok.
The operation panel language changes automatically after it is downloaded from the PC to the device.

Changing the Confirmation ID

8.7.7
Authorization for security-relevant operations on the device directly via the on-site operation panel or DIGSI 5
is assured by the assignment of confirmation IDs. These are assigned exclusively using DIGSI 5 (see also
10.5 Authentication, Connection Password, and Confirmation ID During
Changing Confirmation IDs on the PC in DIGSI 5
To reach the menu for the confirmation IDs of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Security
The confirmation IDs for 4 different access types appear in the main window.
•
Activate or deactivate a confirmation ID by setting or removing a check mark in the Active column.
•
To change a confirmation ID, click the change button in the Action column. The change window opens.
•
Enter the new confirmation ID (comprising 6 digits between 0 and 9) twice, and then confirm it with Ok.
The confirmation IDs are set ex factory as default (see table
[scaktvor-210311-01.tif, 1, en_US]
Figure 8-53
[scbstcod-210311-01.tif, 1, en_US]
Figure 8-54
160
Language Change with DIGSI 5
Window for Activating Confirmation IDs
Window for Changing Confirmation IDs
Operation).
Table 8-11).
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016