Display Of Routings And Status - Siemens SIPROTEC 5 Operation Manual

Using On-Site Operation Panel

5.8 Display of Routings and Status

5.8

Display of Routings and Status

You can route logic information from the SIPROTEC 5 device to binary inputs, binary outputs and LEDs. With
the menu item Binary I/O of the device you can display the routing of the logical signals and their status.
In order to display the routings in the SIPROTEC 5 device, proceed as follows:
•
In order to access the Binary I/Os from the main menu, use the navigation keys of the on-site operation
panel:
Main menu → Binary I/O
•
Use the navigation keys of the on-site operation panel to navigate within the displayed list and select one
of the 3 following menu entries:
– Binary inputs
– Binary outputs
– LEDs
[scbinipt4-260814-01, 1, en_US]
Figure 5-10
The following examples show how to proceed when reading the on-site operation panel and how to set the
DIGSI for the binary input in the information routing.
•
Select the menu item Binary inputs.
All available binary inputs of the SIPROTEC 5 device will be displayed. Furthermore, following the equal
sign, the current status of the binary input is displayed (see
The following table shows the meaning of the status of the individual menu entries Binary inputs, Binary
outputs and LEDs.
Menu Item
Binary input
Binary output
LED
The status of the respective binary inputs, binary outputs or the LEDs is updated automatically by the actual
state in the device.
68
Binary I/O Menu Item
Status
X
-
X
-
X
-
Figure 5-11).
Description
Input is active
Input is not active
Output is active (contact is closed)
Output is not active (contact is open)
LED is switched on
LED is switched off
C53000-G5040-C003-7, Edition 06.2016
SIPROTEC 5, Operation, Manual