Contents - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)
Antenna
A
PMR Link jack
B
For performing PMR Link. Single external wireless trigger jack.
Status LED
C
Indicates the status of the transceiver.
Indication
Blinking green (slow)
Blinking green (fast)
Green
Blinking red (slow)
Blinking red (fast)
Red
Blinking blue (slow)
Blinking blue (fast)
Blue
Blinking orange
(slow)
Blinking orange (fast)
Blinking green and
orange alternately
0
Blinking (slow): Blinks every 3 seconds
Blinking (fast): Blinks every 1 second
Precautions
0 When the Status LED blinks rapidly in blue and a system error appears, check that the plug of the clip microphone is
firmly inserted into the Portable base WD-K10PBS/Transceiver WD-K10TR. Then turn on/off the power to reset. If the
unit still does not recover, please consult the authorized dealer or installer.
Group LED
D
Indicates the current call group.
[PF 1] key/[PF 2] key
E
Press or press and hold to execute the function configured to each key.
0 Any function can be configured to each key. The transceiver may come with different name and function for each key.
For details, please consult the authorized dealer or installer.
[PTT] key
F
Press to make a call.
0
Depending on the setting, this key is disabled when a clip microphone or headset microphone adapter which is sold
separately is connected. For details, please consult the authorized dealer or installer.
[All Call] key
G
Press and hold to make an All Call.
0 Any function can be configured to the [All Call] key. The transceiver may come with different function for each key.
For details, please consult the authorized dealer or installer.
Base Station Mode
―
―
Wireless Sub Unit Registration Mode
Low battery
Very low battery
Power ON
―
System error
Wireless setting by the PC
Normal Mode
Menu Setup
Updating
Status
Transceiver Mode
Normal Mode/
Listening Talk
Menu Setup
Power ON/No line connection
(Out of range, call disabled)
Listening Mode
Updating

Contents

―
―
13