When Out Of Range - Kenwood WD-K10 Series User Manual

3 MAKING A CALL
3.2 Making Calls (Group Call Mode)

When Out of Range

When a sub unit has moved out of range of the base unit connection area, the Status LED lights up in red. An Out of Range
notification tone will emit when the [PTT] key is pressed.
Move to a location where connecting to base unit is possible.
Reconnecting Base Unit
The Status LED blinks in green.
Note
The Out of Range notification tone differs according to the "Out of Range notification tone" settings in System Setup.
0
For "Out-of-Range tone OFF": A notification tone will not be emitted even if the sub unit is out of range.
For "Out-of-Range tone ON": A notification tone will continue to emit until the sub unit is connected to the base unit
again.
For "PTT Key Alert ON": A notification tone will emit while the sub unit is out of range and the [PTT] key is being pressed.
To configure the setting, consult the authorized dealer or installer.
0
Status LED
Contents
50