Making Calls In High Audio Quality - Kenwood WD-K10 Series User Manual

3 MAKING A CALL

3.7 Making Calls in High Audio Quality

3.7 Making Calls in High Audio Quality
The audio quality of calls between devices can be configured in this system.
When "High Quality" is selected for "Audio Quality" in System setup, high-frequency audio can also be transmitted by
bundling multiple communication for "Normal" and expanding the communication bandwidth. It is possible to make a call
that is clearer and easier to pick up than in "Normal".
Precautions
0
To use High Audio Quality, it is necessary to configure the device system. To change the setting, consult the authorized
dealer or installer.
0
The audio quality depends on the setup for each system. Audio quality cannot be selected for each device.
0
When using High Audio Quality, groups that can be used for external connection will become one group.
Overview of High Audio Quality Mode
0 When High Audio Quality is selected, it is effective to use the device to broadcast directly to a facility or floor.
0 When using in Listening Mode, information can be shared clearly by setting the base unit to High Audio Quality.
0
As multiple communication is bundled, the maximum number of simultaneously connected sub units will be half the
number of that in Normal Audio Quality.
The number of groups will be two: A and B.
Use according to your purpose.
0
Depending on the performance of the accessories used (such as headset and speaker), it may be difficult to improve the
audio quality.
High Audio Quality Mode
Up to 5 units can be connected
Sub Unit
Normal Audio Quality Mode
Up to 10 units can be connected
Or
Base Unit
(Default setting)
Sub Unit
Contents
59