Performing Pmr Link By Pressing The Ptt] Key - Kenwood WD-K10 Series User Manual

3 MAKING A CALL
3.6 Performing PMR Link
Performing PMR Link by Pressing the [PTT] Key
If "Function Link Start" is set to [Enable Link with], the operation is the same as
Key on page 61". Assign the Broadcast function to any function key to activate the Broadcast function.
1
Press the [PTT] key on the clip microphone or transceiver.
The PMR Link function will activate and a mode change tone will emit.
Start the call after the mode change tone is emitted.
Note
If "Function Link Start" is set to [Disable Link with], the operation is the same as
0
Pressing the [PMR Link] Key on page
Link function.
2
Speak into the clip microphone.
The broadcast continues while the [PTT] key is pressed.
3
To end the PMR Link, release the
with]. This will also deactivate the Broadcast function.
A mode change tone will emit and users will return to the "Group Call Mode" of their own groups.
Precautions
0
The operation is the same as "Performing PMR Link by Pressing the [PMR Link] Key" if "Function Link End" is set
to [Disable Link with]. Assign the PMR Link function to any function key to end the PMR Link.
0
This activation method starts the PMR Link when the [PTT] key is pressed so it is not suitable if you do not intent
to always call to the external wireless system.
Note
The PMR Link function is canceled in the following cases.
0
When the time configured in PMR Link Time-out Timer has lapsed.
0
When All Call has started.
0
56". Assign the PMR Link function to any function key to activate the PMR
[PTT] key if "Function Link End" in "Talk Setting" is set to
"Broadcasting by Pressing the [Broadcast]
"Performing PMR Link by
Contents
[Enable Link
57