Kenwood WD-K10 Series User Manual page 41

2 PREPARATION
2.4 Setting Various Functions
Checking Battery Remaining Capacity
You can check the current battery remaining capacity.
1
Press the [Power]
A voice announcement according to the battery remaining capacity is being played. The battery charge LED will
display the remaining capacity for 4 seconds.
Remaining Capacity in the Battery
30% or more
10% or more to less than 30%
Less than 10%
Note
When the remaining capacity in the battery is low, the Status LED blinks in red and the battery warning tone is
0
emitted at every 10-second interval. Please charge the battery.
The voice announcement may not be played depending on the transceiver settings. (
0
key.
Group LED
Status LED
[Power] key
Battery Charge LED
Blinks 3 times
Blinks 2 times
Blinks 1 time
Voice Announcement
Battery high
Battery middle
Battery low
on page 47)
Contents
40