Kenwood WD-K10 Series User Manual page 37

2 PREPARATION
2.3 Registering the Device
4
Restart the sub unit.
When registration of sub unit is successful, restart the sub unit.
After the registration is complete, turn on the power of the base unit and restart as well.
Note
To exit registration mode, press and hold the [PF 2] key.
0
If registration fails repeatedly, the maximum number of registrations may have been exceeded.
0
Registering Sub Unit to WD-K10BS
Note
A sub unit cannot be registered to a secondary base unit for a Baselink system. Register it to the main base unit.
0
1
Turn off the sub unit if it has been turned on.
To turn off the sub unit, press and hold the [Power] key until the Status LED goes off.
2
Turn on WD-K10BS.
Plug the AC adapter of WD-K10BS into the AC outlet to turn on.
3
Press and hold the
The sub unit enters into registration mode.
[Registration] key until the Status LED lights up in green.
Status LED
[Registration]
key
Contents
36