Contents - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)
Underneath the Packing (Setting/ Adjust Area)
There is an Ext Audio input/output jack, a volume adjust knob and a Mode select switch underneath the packing.
Ext Audio input/output jacks (2 lines)
I
Group calls can be output externally by connecting this unit to an external audio equipment. Connecting to a hall master
WT-MC60 or external device allows users to participate in group calls.
Pull out the jack packing when connecting an external device.
To maintain the waterproof performance, cover the jacks with the packing when not in use.
Volume adjust knob
J
For adjusting the volume of the external audio equipment or microphone connected. A flat-blade screwdriver is required
for the adjustment.
Mode select switch
K
For configuring the device type and operation mode of the base station.
I
J
K
Packing
Mode select switch
Pull out
Stand-alone system base unit
The unit operates as a stand-alone
system when either of MAIN/SUB
1 2 3 4
(SW2) is selected.
Baselink
Main Base Unit
1 2 3 4
Baselink
Secondary Base Unit
1 2 3 4

Contents

18