Using The Brakes And Steering Locks - Philips EPIQ 7 User Manual

Using the Brakes and Steering Locks

NOTE
If you change the system date while a study is paused, existing results for date-dependent
calculations in the paused study are not recalculated by the system at any time.
NOTE
When you enter invalid characters in the time and date setups on the Header tab of System
Settings, some characters are displayed and then erased, but others are not displayed at all. An
invalid date may be displayed in the setups but not entered when you close the setups. After
changing a date and exiting the setups, always check the date on the imaging display.
NOTE
This system supports the Network Time Protocol (NTP), which keeps your system's time
accurate by synching with the NTP server. To activate this feature, your system administrator
must create a connection to an NTP server.
1. Touch Utilities.
2. On the System tab, touch Setups.
3. Click System Settings and then Header.
4. In Set Time, select a Format (12 hours or 24 hours), click the time in the Time box to select
it, and then use the number keys to enter the correct setting. Select Am or Pm, if necessary.
5. In Set Date, select a Format, click the Date to select it, and then use the number keys to
enter the correct setting.
Using the Brakes and Steering Locks
All four wheels swivel to aid in maneuvering the system. You can engage steering locks to make
steering easier when moving the cart. Brakes help keep the cart stationary while in use. The
brakes and the steering locks are designed so that they cannot be engaged simultaneously.
Your system has a foot pedal at the lower front of the cart. Operate the brakes and the steering
locks with the foot pedal using the appropriate procedure.
EPIQ 7 User Manual 4535 617 25341
Using the System
115