Table of Contents
Advertisement
Selecting a Preset
Using the System
After you select the clinical application/preset, the system calibrates the transducer, enables
the transducer for operation, and updates system status to reflect the transducer type and the
preset you selected.
Selecting a Preset
When the system is turned on, the system selects the same preset that was in use when the
system shut down (unless it is incompatible with the initially selected transducer). For more
information, see
"Setting the Default Transducer and Preset" on page
148.
During system operation, you can select a different preset for the selected transducer.
1. Touch the transducer name.
2. Touch a preset to select it.
ECG Feature
The system can display three physio traces, each representing a physiological input. These
inputs can include low-level ECG, high-level ECG, respiratory, pulse, phono, and auxiliary
signals. (Low-level ECG comes from leads connected to the patient; high-level ECG comes from
a patient monitor or other similar equipment.) Heart rate, derived from the ECG signal, is
displayed on the screen whenever ECG is connected and displayed.
DVD, CD, and USB Devices
The system supports a variety of removable media including DVD, CD, and USB storage devices.
For additional information on specific applications of the DVD drive, see the Help. To display the
Help, touch
. To close the Help, touch Close or touch
again.
For details about DVD and CD devices, see
"DVD Drive" on page
144.
For details about USB devices, see
"USB Devices" on page
145.
Media Compatibility
CD media capacity is approximately 700 MB; single-layer DVD media capacity is approximately
4.7 GB. Rewritable media types (indicated by the RW suffix) can be erased and used again, but
you cannot erase media that has the R suffix. Dual-layer DVD media is unsupported.
EPIQ 7 User Manual 4535 617 25341
143
Advertisement
Table of Contents
