Panasonic LB-DH7 Series Operator's Manual page 15

Introduction
User label
The following labels can be attached to a user label area of a magazine.
` 1D or 2D code label (only one of them)
` Label with a character string (for magazine management)
The 1D/2D code label and the character string label can be used separately or together. However, the label should
be attached in the predetermined area and not overlap each other.
The 1D/2D code label of the specifications below can scan information with the built-in scanner of the unit
and display it on the Web interface. (
Specifications on 1D codes
<
Standard:
Label size:
Maximum number of characters:
Thin bar width:
Ratio of thin bars to thick bars:
Inter-character gap:
Bar length:
Leading and trailing margins:
Color (recommended)
e.g.,
70 mm (2.75z) or smaller
Specifications on 2D codes
<
Standard:
Label size:
Maximum number of characters:
Cell size:
Margins in four directions:
Color (recommended)
e.g.,
DATA ARCHIVER
* "dot" refers to the smallest printing unit of a printing device.
e.g., Printing with the maximum size of 14 mm (0.55z) k14 mm (0.55z)
600 dpi printer: Printable with Version 7 or earlier (45 k 45 cells)
300 dpi printer: Printable with Version 4 or earlier (33 k 33 cells)
Handling a magazine and magazine drawer
33)
>
Code39
14 mm (0.55z) (H) k 70 mm (2.75z) (W) or smaller (with margins)
12 characters (without stop and start codes)
12 mil (= 0.305 mm (0.012z)) or more
1:2.75
12 mil (= 0.305 mm (0.012z)) or more
7 mm (0.28z) or more
3.05 mm (0.12z) or more
Black (code), White (background)
7 mm (0.28z) or more, 14 mm (0.55z) or smaller
>
QR code (Model 2)
14 mm (0.55z) (H) k 14 mm (0.55z) (W) or smaller (with margins)
256 characters (alphabetic character and number), 256 byte (UTF-8)
4 dots* or more and 0.254 mm (0.01z) or more per side
4 cells or more (A larger size is easier to read)
Black (code), White (background)
14 mm (0.55z) or smaller
14 mm (0.55z) or smaller
15