Panasonic LB-DH7 Series Operator's Manual page 40

Operations
Configure menu
This menu allows you to select the desired menu item and make various settings.
System <Configure>
Sets basic information concerning the unit.
≥ Change the settings, then select "Submit" to accept the change.
System Name
Location
Barcode Scan Mode
Change Password <Configure>
Sets the unit administrator password.
≥ Change the settings, then select "Submit" to accept the change.
New Password
New Password
Confirmation
Web interface operation
Sets the unit's system name.
≥ Current system name is displayed on the application screen.
≥ A maximum of 32 characters can be input.
≥ The initial setting is "LB-DH7".
Sets the information on the location of the unit.
≥ A maximum of 64 characters can be input.
Specify the read mode for 1D/2D code.
CODE39 Only: Read CODE 39 of 1D code only.
QR CODE Only: Read QR CODE of 2D code only.
CODE39 + QR CODE: Both CODE 39 of 1D code and QR CODE of 2D code
can be read.
≥ The read time may be longer for "CODE39 + QR CODE".
≥ The initial setting is "CODE39 Only".
Enters a new password.
≥ A password must consist of 8 to 11 characters containing at least 1 alphabetic
character (both upper-case and lower-case characters are accepted), 1 number
and 1 symbol.
≥ Manages the password so that it is not forgotten.
Re-enters the new password to confirm.
40