Panasonic LB-DH7 Series Operator's Manual page 71

Others
Item
± RAID problems
Don't know the RAID level
The RAID level has been
changed
Cannot change the RAID
level
Cannot write to magazine
with the RAID level which
has been set
Read/write redundancy is
decreased
Troubleshooting guide
Problem
Don't know the current RAID level
for the unit.
Don't know the current RAID level
for the magazine.
The RAID level which was set on
the Web interface has been
changed.
Cannot change the RAID level
from the Web interface.
Cannot format the magazine with
the RAID level which has been set
on the Web interface.
Changed the RAID level of the
unit, but the RAID level of the
formatted magazine does not
change.
The message that redundancy is
decreased appears when
mounting the magazines, writing or
reading.
(Warning code: W3010/W3011/
W3020)
71
Cause/Solutions
)Check the level on the Web interface.
( 31)
(Settings include those of the unit, the
application, and the magazine.)
The RAID level has been set from an
application.
)When the application has a RAID level
setting function, set it from the
application.
The RAID level has been set from an
application.
)When the application has a RAID level
setting function, set it from the
application.
The RAID level of the magazine is set to
the one set at the time of formatting. The
level cannot be changed afterwards.
)Check the warning code and try the
solutions. ( 80)
)When the magazine redundancy is
reduced, it is recommended to use
another magazine.