Diagnostic - Panasonic LB-DH7 Series Operator's Manual

Operations

Diagnostic

The unit provides a self-diagnostic function.
The self-diagnostic function operates at predetermined times on the built-in changer unit, drive system, fans and
external power supply , respectively.
*1
You can also execute the self-diagnostic function by selecting "Manage"
≥ After "Diagnostic" is completed, if each status in the right pane of the Web interface is indicated as "Ready" and no
new "Last Error/Last Warning" information is displayed, no problems were detected. If a new problem is displayed,
select "Monitor" "S.M.A.R.T." to check the S.M.A.R.T. information, obtain a log file (
or warning code ( 75), and then examine the location where the problem lies.
≥ When a magazine is loaded in the drive system, "Diagnostic" cannot be executed.
Check whether a magazine has not been loaded by selecting "Monitor"
magazine is loaded in the drive system, use the application to eject the magazine.
≥ To avoid any impact on the application, terminate it prior to running the "Diagnostic" function.
≥ The duration of "Diagnostic" depends on the condition and it may take as long as about 5 minutes.
Self-diagnostic function execution
Changer unit
Drive system
Fan
External power supply*
*1 Only certain external power supply models that have been validated to work with the unit.
*2 The self-diagnostic function executes about every 30 days when the power is continuously on.
There is no impact on the application as it is a background operation.
≥ During the self-diagnostic process, fans, changer unit and drive system are operated for an accurate diagnosis.
≥ Please note that self-diagnostics cannot detect all anomalies.
Various Functions
Power on
±
±
±
±
1
"Diagnostic" on the Web interface.
"Drive"
About every 30 days
s
s
±
±
61
62), and look at the error
"Magazine Address". If a
During "Diagnostic"
*2
execution
±
±
±
±