Errors And Warnings - Panasonic LB-DH7 Series Operator's Manual

Others

Errors and warnings

If an error or a warning situation arises while the unit is operating, it will be indicated in the right pane of the Web
interface, and an email notification (when email notification is enabled) as well as an SNMP trap notification (when
SNMP trap notification is enabled) will be issued in response to the contents of the error or warning. In addition, the
error or warning will be recorded in the log.
≥ If a warning arises, processing in progress is interrupted depending on the contents of the warning.
Action to be taken for an error or warning
If an error or warning situation arises, check the error code or warning code in "List of error codes" (
warning codes" ( 80) and take proper action in response to the error or warning. If the problem cannot be solved,
turn the unit off and then back on and retry the operation. (If turning off the unit does not take place, press and hold
the power button for 15 seconds or more to forcibly turn off the unit.) When the problem cannot be solved even after
the above action or the unit must be repaired, contact your support service provider. (
Checking the error or warning code
An error or warning code with the unit can be known through the following:
` Web interface
` Email notification
` SNMP trap notification
` Log
Elements of error and warning codes
≥ An error in the magazine carrier unit is displayed as an error of Base Module (LB-DH70A) regardless of the
position where the error occurred.
≥ When a code that is not included in the "List of error codes" (
displayed, please contact maintenance. (
e,g.,
E1234-A
Main code
Error
Subcode
E：
Warning
Ｗ ：
83)
75
83)
Module name
77) or the "List of warning codes" (
77) or "List of
80) is