Operations
Drive <Monitor>
Indicates information concerning the drive system of the unit.
Status
Additional Information
Medium Removal
Temperature
Encrypt Mode
Verify Mode
RAID Level
Web interface operation
Indicates the state of the drive system of the unit.
Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.
Indicates additional information of "Status" (only when "Status" is set to "Ready").
No Disc: Discs are not in.
DiscIn: Discs are in.
DiscIn W Protect: Discs are in, but they are write-protected.
DiscIn R/W NG: Discs are in, but a write/read error has occurred.
Indicates the permission status for ejecting media from the drive system (only
when "Status" is set to "Ready").
prevented By Host: The application prohibits the ejection of the disc from the
drive.
≥ The disc can be ejected if this shows blank.
Indicates an internal temperature of the drive system.
Indicates the enable/disable setting on writing data encryption.
≥ When there are no discs or if there is an unformatted disc inserted, "---" is
displayed.
≥ For details, refer to "Encryption of write content" (
The verify mode setting status for writing is displayed.
Auto Verify: Automatically determines the records to be verified and then verifies
them.
All Verify: Verifies all records.
≥ For details, refer to "Verify mode" (
Indicates the RAID level setting. (
RAID 0: RAID 0 is set.
RAID 5: RAID 5 is set.
RAID 6: RAID 6 is set.
≥ For details, refer to "RAID functions" (
31
56).
56).
54)
54).